Signalling technician
Signalling technicians inspect and maintain signalling equipment that keeps the trains running safely. They also identify and repair faults.
- Pay £28k–£45k
- Hours 37 to 45 a week
- Routes in Apprenticeship, Direct Application
Before you go further
Some work has real physical or medical expectations. We list them honestly so you can plan, and so you can ask about adjustments early rather than after a rejection.
Worth knowing now One requirement below is genuinely part of this job.
Colour vision
Needed for this workNormal colour vision, tested with the Ishihara plates as part of the rail medical.
Stated as essential by rail medical providers for signalling, electrification and telecoms apprenticeships. Colour also matters because wiring and drawings use colour codes.
If you have a colour vision condition
Signalling technicians install and repair the equipment that tells trains where they may go, and they work with colour-coded wiring and drawings. The rail medical for this work requires your colour vision to be recorded as normal, using the Ishihara plates, and the certificate that lets you work on the track has to be kept up to date. Training providers state normal colour vision as an essential requirement for signalling, electrification and telecoms apprenticeships. We found no published second test for this role, so if you have a colour vision condition, ask the employer or college early rather than after you start.
What you'd do
- install or renew signalling equipment, cables and power supplies
- respond quickly to signal and points failures
- carry out routine maintenance checks
- check readings transmitted by equipment monitoring systems
- upgrade radio and electronic communications networks
- find and fix equipment faults on site, and repair more complex issues in a workshop
- keep maintenance records up to date
A typical day
As a signalling technician, you inspect and maintain signalling equipment to ensure trains run safely. Your day involves installing or renewing equipment, responding to signal failures, and carrying out routine maintenance checks. You may also upgrade communication networks and repair faults both on site and in a workshop. Keeping maintenance records up to date is essential.
The best parts
- Working outdoors on rail tracks
- Repairing complex issues in a workshop
- Upgrading radio and electronic communications networks
The hard parts
Every job has these. If a website only tells you the good bits, it is not being straight with you.
- Responding quickly to signal and points failures
- Working in noisy environments
- Wearing protective clothing
Myth vs reality
The myth is that signalling technicians only work in quiet offices. In reality, they often work outdoors on rail tracks, deal with noisy environments, and face the challenges of maintaining safety equipment.
What employers actually expect
Nobody explains this before your first job. These are the things an employer assumes you already know.
The first week
You start by learning how to inspect and maintain signalling equipment. You're taken through the safety procedures and shown how to carry out routine checks. You won't be allowed to work on your own yet. Instead, you ask questions whenever you're unsure. It's important to get everything right, as mistakes can lead to serious issues on the tracks.
Typical hours
Your shifts include evenings, weekends, and bank holidays. This means you'll need to plan your social life around your work schedule. It can be challenging to find time for friends and family, especially when you're on call.
What gets people let go
Not following safety rules can lead to dangerous situations. If safety procedures aren't adhered to, it puts not just you but also other workers and passengers at risk. This can result in serious incidents that affect the entire railway system.
Ways in
-
Apprenticeship
You could apply to do an apprenticeship with a rail engineering company, such as: Rail Engineering Technician Level 3 Advanced Apprenticeship Rail Engineering Technician Level 4 Higher Apprenticeship High Speed Rail and Infrastructure Technician Level 4 Higher Apprenticeship Apprenticeships are offered by rail and tram operating companies, Transport for London and Network Rail. Entry requirements You'll usually need: 5 GCSEs at grades 9 to 4 (A* to C), or equivalent, including English and maths, for an advanced apprenticeship 4 or 5 GCSEs at grades 9 to 4 (A* to C) and A levels, or equivalent, for a higher or degree apprenticeship More Information equivalent entry requirements guide to apprenticeships Transport for London apprenticeships Network Rail apprenticeships
-
Direct Application
You may be able to apply directly to rail engineering companies, if you've got experience and qualifications in electrical or electronic engineering from another industry, or from time spent in the armed forces.
Skills you'll build
- to be thorough and pay attention to detail
- the ability to use, repair and maintain machines and tools
- the ability to work well with others
- patience and the ability to remain calm in stressful situations
- knowledge of public safety and security
- to be flexible and open to change
- knowledge of transport methods, costs and benefits
- excellent verbal communication skills
- to be able to use a computer and the main software packages competently
Where it can lead
With experience, you could move from technical officer to senior technician, maintenance team leader and signals infrastructure manager. With further qualifications, you could become a signalling designer or incident investigator. Current opportunities Find apprenticeships, courses and jobs available near you.
- Road transport manager · needs experience first
- Warehouse manager · needs experience first
- Supply chain manager · needs experience first
One thing you could do this week
Contact a local rail engineering company and ask if you can spend a day shadowing a signalling technician to see how they inspect and maintain signalling equipment.